#Xiaomi flash tool for mac how to

To flash a new firmware via an standard USB to UART adapter, simply connect the Thermometer as seen in the picture 'Mi_SWS_Connection.jpg' to the USB to UART converter and run the ATCtelink.py tool with the first parameter being the name of the file you want to flash.Д®xample: 'python3 ATCtelink.py ATC_Thermometer.bin'

#Xiaomi flash tool for mac how to

USB to UART How to flash the custom firmware or unbrick the device: To flash the stock firmware back to the Thermometer, just open the corresponding file (link in the section 'Stock firmware' at the bottom of this document) for flashing. If the screen stays off, pull the battery out for a short amount of time. Click on start flashing to flash the new firmware to the Thermometer.ДЄfter the flashing is done, the device should reboot.Be careful to select the right one as it's not possible to check the firmware further. While it's doing so you can already select the firmware file. After the connection is successful click on 'Do Activation' to Authorize the Connection.Connect to the Xiaomi thermometer searching may take a while as it broadcasts not so often for better battery life.

Download the ATC_Thermometer.bin file from the latest release assets and open the Web Flasher.Thanks to Eduardo Ruiz OTA How to flash the custom firmware: You can support my work via PayPal: this keeps projects like this coming. The web flasher works for many devices that uses the Telink TLSR82** MCUs and it can also be used to reflash the Stock firmware back to the device. It is possible to update the Firmware of the Xiaomi Thermometer OTA with this WEB Tool I wrote: Victor did some very nice refinings of this custom firmare so i really suggest on cheking it out and even use his version as it offers many more functions including non-volatile storage and a better low power management

This repo is made together with this explanation video:(click on it) Custom firmware for the Xiaomi Thermometer LYWSD03MMC and Telink Flasher via USB to Serial converter.